Active Mud Density, % Oil & % Water
TPA / SiCon Sensor
The TPA /SiCon Sensor measures Mud Density, Percent Water & Percent Oil of any oil-based mud system. The triple probe array sensor package has three independent density measurements for the highest accuracy measurement solution.
Minimum cutting/welding required for installation and minimum preventative maintenance.
Possum Belly Density
PBD Sensor
The PBD Sensor measures Mud Density at the flowline/possum belly. The PBD is an unprecedented measurement solution in this very challenging measurement environment.
Minimum cutting/welding required for installation and minimum preventative maintenance.
All results are gas compensated.
Shaker Effluent Density
SED Sensor
The SED Sensor measures Mud Density in the sand trap shaker effluent tank. Used to determine shaker removal efficiency and becomes the feed for the centrifuge suction line.
Minimum cutting/welding required for installation and minimum preventative maintenance.
API-13B Suite of Calculations
SiCon Sensor
The SiCon sensor measures % Oil, % Water, % Solids, % LGS, % HGS and ASG.
The overall ASG (Average Specific Gravity) of the solids in the mud is one of the KPI's that is vitally important to the health of the mud system.
Key component to the compositional material mass balance algorithm.
Oil Water Dilution Flow Meters
OWD Sensors
The Base Oil & Water dilution volume flow meters measure and totalize all dilution volume being added to the active mud system.
Key component to an accurate volume reconciliation determination.